Recent Changes

Wednesday, May 25

  1. page ceramics 2 edited {052401_1201[01].jpg} This Metal Muggy This is a ... metal mug. 2011 {052301_1007[00].j…

    {052401_1201[01].jpg}
    ThisMetal Muggy
    This
    is a
    ...
    metal mug. 2011
    {052301_1007[00].jpg}
    ThisMetal Fridge
    This
    is my
    ...
    look real. 2011
    {052301_1007[01].jpg}
    Square
    This would be my square mug that went with the square vace project. I figured since pretty much all my mugs had handles I did'nt put a handle on this one. This was of course done on the wheel and it turned out alright since I wasnt being proffessional about it it dosnt look perfect but good enough.
    {052301_1011[00].jpg} {052301_1013[00].jpg} {052301_1013[01].jpg} {052301_1026[00].jpg} {052401_1142[00].jpg} {052401_1200[00].jpg} {052401_1200[01].jpg}
    TheUgly Juggy
    The
    name for
    ...
    a ghotee. 2011
    {052001_0730[01].jpg} {052001_0730[00].jpg}
    ThisEye Pot
    This
    is a
    ...
    some character. 2011
    {051101_1847[00].jpg}
    ThisBottled Up
    This
    is a
    ...
    the inside. 2011
    {IMG00286-20110120-0937.jpg}
    ThisPerfecto
    This
    here mug
    ...
    about it. 2011
    {052401_1201[00].jpg}
    Simply Mug
    This mug was a side project that went with a normal project that we had to do. As you can see it wasnt fired for the second time but it is'nt to bad of a mug. I made the handle by taking a coil and a bucket of water then I just smoothed the coil down in the bucket of water with my hands till it was just right to stick on the round mug part that I did on the wheel.
    2011
    (view changes)
    10:36 am

Tuesday, May 24

  1. page ceramics 2 edited {052401_1201[01].jpg} This is a side project mug that went with my metal looking fridge projec…

    {052401_1201[01].jpg}
    This is a side project mug that went with my metal looking fridge project that I did. This mug is simpley made by useing a slab for the bottom and the side parts of it. I made a circle slab on the bottom then took a longer slab and put it along the sides to create a cup like shape. I overlapped the slab on the side then made little screw looking things then stuck them on the side to make it look like a metal mug.
    {052301_1007[00].jpg}
    This is my firdge I made for the metal looking project that we had to do. I put slabs on the bottom and all four sides then carved designs on the sides to make it look like a fridge. the only problem with it is that a ot of it fell apart in the kilm when it was being fired like the handle that should be on the front and the bottom has chunks missing from it. I even put little magnet looking peices on the front and sides to make it look real.
    {052301_1007[01].jpg}
    This would be my square mug that went with the square vace project. I figured since pretty much all my mugs had handles I did'nt put a handle on this one. This was of course done on the wheel and it turned out alright since I wasnt being proffessional about it it dosnt look perfect but good enough.
    {052301_1011[00].jpg} {052301_1013[00].jpg} {052301_1013[01].jpg} {052301_1026[00].jpg} {052401_1142[00].jpg} {052401_1200[00].jpg} {052401_1200[01].jpg}
    The name for this is the ugly jug and it was never fired for the scond time. I made the jug or pot part with coils then smoothed it out then for the lips and mustache I used coils and the rest was just chunks of clays shaped into ears nose and a ghotee.

    {052001_0730[01].jpg} {052001_0730[00].jpg}
    This is a pot i made from coils. We were asked to either make it on the wheel or from coils and it had to be like 10" tall. i glazed the out side with this red slip stuff to make it have that rough look then glazed the inside with coal black glaze. I also carved some little design on the side to give it some character.
    {051101_1847[00].jpg}
    ...
    the inside.
    {IMG00286-20110120-0937.jpg}
    ...
    would be myperfectmy perfect mug. It
    ...
    are no cracks or any other kind of disformaties. The design part I kinda took from Mr.Smith Because I was looking at on of his mugs while I was putting my designs on. I glazed it all the same color of glaze and thats about it.
    {052401_1201[00].jpg}
    This mug was a side project that went with a normal project that we had to do. As you can see it wasnt fired for the second time but it is'nt to bad of a mug. I made the handle by taking a coil and a bucket of water then I just smoothed the coil down in the bucket of water with my hands till it was just right to stick on the round mug part that I did on the wheel.

    (view changes)
    10:51 am
  2. 10:09 am
  3. 10:09 am
  4. 10:09 am
  5. 10:09 am
  6. 10:09 am
  7. 10:09 am
  8. 10:09 am
  9. 10:09 am

More